Are you tired of the molds on your cutting board or worried about using a cutting board whitener? Getting tired of sanding your plastic cutting board, and now it may seem like a nightmare to you? Well, these issues will not bother you if you follow some tips. Some useful strategies will help you a lot in cleaning a plastic cutting board significantly, whether you are a chef or a newbie in your everyday kitchen tasks.

Molds are often irritating, and they also pose a threat to your health. As a cutting board is an essential part of preparing the ingredients before cooking, one may feel uneasy when they find disturbing molds.  

There has been an age-old argument over natural cleaning versus chemical cleaning for cutting boards that will be perpetually debated. You may think of using chemicals to remove the molds, but is that safe? The fact is, Why would you use chemicals that may pose a severe threat to your health where you can go for a healthy natural process? Moreover, these natural processes are super comfortable and simple.

Some effective process of How to Clean a White Plastic Cutting Board:

Using 3% Hydrogen Peroxide for removing molds: 

The first step is to rinse and clean your cutting board with hot, soapy water. Afterward, you have to pour a solution of 3% hydrogen peroxide over the board. Here, you might think that hydrogen peroxide is also a chemical. Why are we suggesting you for using it, and what difference will it make from the other chemicals?

  1. The answer is, unlike other chemicals, Hydrogen peroxide evaporates automatically. That is why it causes no harm to your health and does not stay on the surface of your cutting board after a certain period.
  2.  Another good news is that it is an effective bleaching agent that adequately serves to brighten surfaces and kill bacteria.
  3.  It is an all-in-one disinfectant. That means it is anti-mold, anti-mildew, anti-fungal, and antibacterial at the same time.

Using Lemon for removing stains:

If you are disturbed by the stains on your cutting board, you will be surprised to know what a Lemon can do to mitigate your pain. Lemon juice is an effective agent that serves the purpose of removing the stains significantly.

  1.  Lemon juice is proved to be an effective plastic board whitener in a sense.
  2. The antibacterial properties of lemon juice help to clean the outer surface of the cutting board.
  3.  Lemon contains citric acid, which plays a vital role in cleaning. 
  4.  Citric acid is a mild acid helpful for removing spots and hard water stains.

Using Lemon with Salt for removing potent strains:

You may combine lemon juice with abrasive, coarse salt for some stain-lifting severe power. Just pay attention to the following instructions to get a fantastic result.

  1. You have to sprinkle two tablespoons of coarse salt onto a clean, dry cutting board.
  2. Scour the surface of the cutting board after placing a lemon half cut side down on the board. Keep on lightly squeezing the Lemon to release the lemon juice as you go.
  3. Afterward, you have to scrap the salt and lemon mixture into a bowl and discard after letting the mixture sit for five minutes.
  4. Take a clean wet sponge and finish your task by rinsing the cutting board with that sponge. Let the board get dry before use.

Using Hydrogen Peroxide For Removing Stains: 

Using a solution of straight old 3% hydrogen peroxide is also an effective solution for removing stains. This will eliminate the stains on your cutting board if you invest enough time. Just do it using the following instructions.

  1. You have to place the cutting board in a sink.
  2. Take a certain percentage of hydrogen peroxide and spray or pour it over the cutting board until it gets wet.
  3. Take mental preparation to wait for several hours so that hydrogen peroxide can soak the cutting board using enough time. Do this process at night so that you will get enough time and patience.
  4. Finally, use detergent and water to wash the cutting board. Then wait until it gets dry. That’s it.

Using Bleach For Removing Thick Molds:

Are you still feeling insecure with the steps mentioned earlier? Well, sometimes the molds get too thick to be removed. What you need is chlorine bleach.

  1. First, dilute the chlorine bleach properly. Just take half a gallon of warm water and mix two teaspoons of chlorine bleach. This is the ideal proportion to get a significant solution strength.
  2. The next step is to use a kitchen scrubbing brush. Gently scrub your cutting board in the bleach solution until the mold has disappeared. It’s that simple.

By the way, there are some drawbacks to this process. Chlorine bleach may be found not to be a healthy option if it is not diluted correctly. You have to wait until the board gets fully dry before use.

Restoring your cutting Board:

Sometimes you may discover that your plastic cutting board is not in a state of being used anymore. You may think the board is dead, and a proper ritual is necessary. Well, the reality is, you can restore that vulnerable cutting board by taking some simple steps. Sanding is one of the very best effective methods to restore your plastic cutting board.

  1. Sanding a plastic cutting board is not that tough. What you need is medium grade paper, which may be 80 grit or so. 
  2. Take that grade paper and sand until gouges or scratches are eliminated from the board, and the surface gets smooth. 
  3. This requires a lot of sandpapers as the friction causes the heat that is responsible for the melting of the plastic board. To get a slick finish, you have to use a fair amount of grit paper. 
  4. Afterward, the surface needs to be polished with a rouge until the surface gets shiny.

By the way, there are some drawbacks of resurfacing a plastic cutting board as the process is time-consuming to an extent, and sometimes the process needs a lot of patience. In that case, buying a new cutting board may seem comparatively easy and satisfactory.

This should be kept in mind that prevention is better than cure. If you purchase a good quality cutting board with sustainable material, you will find that the board will not get damaged soon. You can buy a long-lasting cutting board from the following link.

Homemade whitener for cleaning:

People often find their white plastic board getting shabby. It hurts!! For that particular scenario, the method, as mentioned earlier of using Lemon, can do a far better job than anything else. Lemon juice is a beautiful alternative to conventional plastic board whiteners. In some worst-case scenarios, Lemon may fall short of serving the purpose. You may go for a conventional plastic board whitener then. Using a homemade paste, you can easily scrub the stains out. But how will you make it? Just follow the instructions. 

  1. Take approximately equal amounts of baking soda, salt, and water, and the ingredients have to be adequately mixed. 
  2. This mixture is also proven to be an effective plastic board whitener. You can use this mixture to scrub out surface stains and to whiten the surface.

If your cutting board has already Stained and you are looking for a way to get rid of stains quickly, watch this video:

Another kind of effective mixture can be created by baking soda, dish detergent, and hydrogen peroxide. You have to follow some steps to get excellent results.

  1. Take one tablespoon of dish detergent, 1-2 tablespoons of hydrogen peroxide, and 3-4 tablespoons of baking soda and mix them properly to get a mixture. Avoid making a soupy mixture and make sure that the mixture becomes easily spreadable.
  2. Let the mixture sit for several hours or overnight after being sprayed or poured on the surface of the cutting board so that it can go to the battle with the stains for a long time to bring a good result.
  3. Properly do the work of wiping or rubbing off the mixture. Use detergent and water to wash the cutting board.
  4. Let the board get dry before use.

How this process works:

  1. Baking soda is a natural abrasive which is renowned for helping to eliminate food stains.
  2.  It is mentioned earlier that hydrogen peroxide is an effective bleaching agent capable of killing bacteria, brightening surfaces, and virtually eliminating stains.
  3.  Dish soap serves the purpose of eliminating any greasy residue left on the board.

 The thick mixture helps to keep the cleaning agents united in one place by dint of its sticky texture. As the agents stay along with each other for a long time, they can work as a team to win the battle against stains and bacteria.

Cons of This Process:

Surprisingly the only drawback of this process is that it is time-consuming.

You may find it boring. If you think so, run the process at night. You may sleep, take a rest, or have your other works done while the cleaning agents are automatically engaged in the battle.

Using Whitener from the market:

You may go for a conventional block whitener available in the market, but it should be kept in mind that proper safety measures are needed to be taken while using block whitener. Personal Protective Equipment should be worn. Moreover, proper usage of sanitizer and washing and drying for a particular time is essential. 

FAQ:

How do you clean a plastic cutting board?

To sanitize a cutting board, either plastic or wood, use a dilute chlorine bleach solution (1 tablespoon per gallon of cold water). Be sure to rinse it well with warm water.

Can you resurface a plastic cutting board?

Yes, you can sand anything you wish to sand. You are asking if you can restore a plastic cutting board by sanding, and yes, you canYou start with a medium grade paper, maybe an 80 grit or so, and sand until the scratches/gouges are out of the board and you have a “smooth” surface.

How do you bleach a plastic cutting board?

  1. Mix a teaspoon of bleach with a quart of water and use a soft sponge to clean your board using this mixture.
  2. Rinse the cleaning solution off of your cutting board with hot water. Stand the cutting board up to dry.

When should I replace my plastic cutting board?

All plastic and wooden cutting boards wear out over time. Once cutting boards become excessively worn or develop hard-to-clean grooves, they should be discarded.

How long should you use a plastic cutting board?

If you are hand washing it and the board has deep cuts or cracks, they become discolored, toss it and buy a new one. They’re not that expensive. Walmart sells 2-packs that are a good deal. As a rule of thumb, I replace mine about every three years unless it’s not coming clean out of the dishwasher.

Suggested Post:

How to Remove Stains From a Plastic Cutting Board

How to Clean Wooden Cutting Board Mold

Write A Comment